You looked up how to render tallow, and the recipes got busy fast. Add salt. Add baking soda. Add a splash of vinegar. Wash it in water three times, or eight. Some brands even say their tallow is "purified." So you want to know: does pure tallow need anything added to it?
No. It does not. At Kai Tallow, we never add anything when we render our tallow. No water. No salt. No baking soda. No bleach or clay. Just true beef suet and low, gentle heat.
That is not us skipping steps. It is a choice we made on purpose, and our lab results back it up. Here is what other makers add, why they add it, and why we say no to all of it.
What Do Some Makers Add When They Render Tallow?
Rendering is the step where raw beef fat is melted down and strained into pure tallow. Most add-ins are there to change how the tallow looks or smells. Here are the common ones:
- Water. The fat is boiled or "washed" in water to pull out color and smell. This is called wet rendering. Many makers repeat it again and again.
- Salt. Salt helps the fat and water split apart faster, so the fat is easier to lift off.
- Baking soda. Baking soda reacts with loose fatty acids in the fat and turns some of them into a bit of soap. Makers use it to cut smell.
- Vinegar or lemon. Some home recipes add an acid to "clean" the fat. Mixed with baking soda, the two just cancel each other out.
- Charcoal or bleaching clay. These soak up color so the tallow looks whiter.
- Big-factory steps. Large plants can use bleaching clays, chemical refining aids, and very hot steam to strip out color and smell on a huge scale.
Notice the pattern? Almost every add-in is about looks and smell. Not one of them makes the fat itself better for your skin.
Why We Refuse Every Add-In
We keep our rendering simple for three reasons: purity, freshness, and fatty acid quality.
1. Purity: nothing left behind
Anything you add to the pot has to come back out. Salt and baking soda get rinsed out with even more water. Baking soda makes a little soap inside the fat. Water can stay trapped in tiny pockets as the tallow cools.
Those water pockets matter. Pure fat gives mold nothing to grow on. Water does. Mold can start long before you can see it. We explain more in Why Honey + Tallow Balms Grow Mold.
Our rule is simple. If it never goes in, it can never be left behind.
2. Freshness: fewer rounds of heat
Every add-in brings more steps. More washes. More time in the pot. And with water, one more round of heat at the end to cook the water back out.
Heat, water, and air are what wear fat down. Oxidation is when oxygen breaks fats apart. It is the first step toward rancid, or gone-bad, fat. Hydrolysis is when water splits fat molecules into smaller pieces. The more rounds of heat and water, the more chances for both.
3. Fatty acid quality: what our lab test showed
We did not want to guess about this, so we tested it. We teamed up with Jennifer Woodson of Grassland Beauty and sent tallow to a third-party lab. Every sample came from the same cow's suet. One was dry rendered with nothing added. The others were washed in water and salt.
The longer water-and-salt sample (15 hours, on the low end of common practice) lost a big share of its most delicate fats:
- Palmitoleic acid (an omega-7 fat): down about 45%
- Alpha linolenic acid (an omega-3 fat): down about 43%
- Linoleic acid (an omega-6 fat): down about 26%
The tallow with nothing added kept its natural balance. You can see every number in We Lab Tested Dry vs. Wet Rendered Tallow. And for the full side-by-side on methods, read Wet vs. Dry Rendered Tallow.
"But Don't Add-Ins Make Tallow Cleaner?"
This is the claim you will see most online. Washing tallow with water, salt, and baking soda makes it whiter and milder. So isn't that cleaner?
Whiter is not the same as better. The color is not the goal. The fats are the goal. A snow-white jar that lost a big share of its delicate fats only looks the part.
Dermatologists raise a fair point here too. They warn that tallow made with harsh chemicals, or made carelessly, can carry leftovers that bother skin. We agree. That is the whole reason we add nothing.
So how do we get a clean, mild tallow without add-ins? We start in the right place:
- True suet only. Suet is the firm fat from around the kidneys. Many sellers call any beef fat "suet." We render in-house so we know it is the real thing.
- Low heat, short time. Burnt or rushed fat is what smells beefy. Low and slow keeps it mild. More on that in Why Kai Tallow Balm Doesn't Smell Like Beef.
- Careful straining. We strain out every bit of tissue, so there is nothing left to cover up.
In short: add-ins cover up a weak start. Great fat and great care do not need covering up.
What Goes Into Our Tallow
It starts with the cattle. Our suet comes from local regenerative, pasture-raised farms. The cattle live outdoors on real land their whole lives, with no antibiotics or added hormones. Grass-fed is only the bare minimum. We go beyond organic and beyond grass-fed.
Then we render it ourselves:
- True suet always.
- Low heat melts it slowly in its own fat.
- Short time. We heat it only as long as it takes.
- Strained meticulously with care into pure tallow.
That is the whole list. Nothing else touches the fat. We never use plastic with our tallow.
This keeps tallow's natural blend whole. Its main fats are oleic acid (about 37-45%), which softens skin. Palmitic acid (about 24-30%) supports the skin barrier and helps skin hold moisture. Stearic acid (about 15-25%) adds structure and protection. These are fats very similar to the ones your skin already makes.
Once our tallow is rendered, we blend it into our balms with a short list of ingredients we choose on purpose. Every one is printed on the label. Nothing is hidden in the rendering step.
When I first started making tallow for my daughter, Kasaia, I wanted it as pure as the food I fed her. Nothing extra. That is why I still say it: if it is not good enough for my babies, it is not good enough for you.
How to Check Any Tallow Brand
You do not need a lab to shop smart. Ask a brand three things:
- What fat do you use? Look for true suet.
- How do you render it? Look for dry rendering, low heat.
- Do you add anything when you render? Water, salt, baking soda, bleach? The best answer is "nothing."
A good brand will answer all three clearly. If they will not say, that tells you something too.
How to Use Pure Tallow Every Day
Warm a small amount between your fingers until it melts. Press it into clean, slightly damp skin, morning and night. Use it every day as your main moisturizer. That daily habit is where you see the most from it.
Our Original Tallow Balm is our daily face and body balm. For sensitive skin or babies, our Bare Tallow Balm has just three ingredients and no scent. Both start with tallow rendered with nothing added, every batch.
New to tallow? Do a quick patch test on your inner arm first. If you are pregnant, nursing, or have a skin condition, a quick check-in with your doctor is a smart step.
FAQ
Do you add salt or baking soda when you render your tallow?
Never. We render true suet on low heat with nothing added. No water, no salt, no baking soda, no bleach.
Why do some people add baking soda to tallow?
To cut smell. Baking soda reacts with loose fatty acids and turns some of them into soap. We would rather start with true suet and gentle heat, so there is no smell to cut.
Is white tallow better than off-white tallow?
No. Washing and bleaching can make tallow whiter, but color does not tell you about quality. The fatty acids do. A creamy, off-white tallow is normal and healthy.
Will pure tallow clog my pores?
Pure tallow is made of fats very similar to the ones your skin already makes. No one has ever reported clogging of pores.
Does tallow with nothing added go bad faster?
No. Pure tallow is very stable on its own. With no water inside, there is nothing for mold to grow on. Keep it cool, out of the sun, and use clean, dry fingers.
Your skin deserves tallow made the simple way. True suet. Low heat. Nothing added. Nothing to hide.
Be blessed!

